Kabelslot
Technyske data
Materiaal: E-Cu
Oerflak behanneling: tin-plated
Produkteigenskip: It wurdt brûkt om it koperen dirigint ein te ferbinen.It hat in werjeftefinster om de lokaasje fan de dirigint te kontrolearjen.
| Model | L Ofmjittings (mm) d Φ | ||
| JM (JGK) 6-5 | 25 | 3.7 | 5.2 |
| JM (JGK) 6-6 | 25 | 3.7 | 6.5 |
| JM (JGK) 6-8 | 25 | 3.7 | 8.4 |
| JM (JGK) 10-5 | 26 | 4.5 | 5.3 |
| JM (JGK) 10-6 | 26 | 4.5 | 6.5 |
| JM (JGK) 10-8 | 26 | 4.5 | 8.4 |
| JM (JGK) 10-10 | 28 | 4.5 | 10.3 |
| JM (JGK) 16-6 | 28.5 | 5.7 | 6.5 |
| JM (JGK) 16-8 | 30.5 | 5.7 | 8.4 |
| JM (JGK) 16-10 | 31 | 5.7 | 10.5 |
| JM (JGK) 25-6 | 35 | 7.2 | 6.5 |
| JM (JGK) 25-8 | 35 | 7.2 | 8.4 |
| JM (JGK) 25-10 | 35 | 7.2 | 10.5 |
| JM (JGK) 35-6 | 37,5 | 8.5 | 6.5 |
| JM (JGK) 35-8 | 38 | 8.5 | 8.5 |
| JM (JGK) 35-10 | 39 | 8.5 | 10.5 |
| JM (JGK) 35-12 | 39 | 8.5 | 13 |
| JM (JGK) 50-6 | 43,5 | 9.8 | 6.5 |
| JM (JGK) 50-8 | 45 | 9.8 | 8.5 |
| JM (JGK) 50-10 | 45 | 9.8 | 10.5 |
| JM (JGK) 50-12 | 45 | 9.8 | 13 |
| JM (JGK) 50-14 | 45 | 9.8 | 14.5 |
| JM (JGK) 70-8 | 50 | 11.5 | 8.5 |
| JM (JGK) 70-10 | 51.5 | 11.5 | 10.5 |
| JM (JGK) 70-12 | 51.5 | 11.5 | 13 |
| JM (JGK) 95-8 | 58,5 | 13.7 | 8.5 |
| JM (JGK) 95-10 | 58,5 | 13.7 | 10.5 |
| JM (JGK) 95-12 | 58,5 | 13.7 | 13 |
| Model | L Ofmjittings (mm) Φ d | ||
| JM (JGK) 120-10 | 63,5 | 15 | 10.5 |
| JM (JGK) 120-12 | 65 | 15 | 13 |
| JM (JGK) 120-14 | 65 | 15 | 14.7 |
| JM (JGK) 120-16 | 66,5 | 15 | 17 |
| JM (JGK) 150-10 | 73 | 16.7 | 10.5 |
| JM (JGK) 150-12 | 73 | 16.7 | 13 |
| JM (JGK) 150-14 | 73 | 16.7 | 14.7 |
| JM (JGK) 150-16 | 73 | 16.7 | 17 |
| JM (JGK) 185-10 | 80 | 19.2 | 10.5 |
| JM (JGK) 185-12 | 80 | 19.2 | 13 |
| JM (JGK) 185-14 | 80 | 19.2 | 14.7 |
| JM (JGK) 185-16 | 80 | 19.2 | 17 |
| JM (JGK) 240-12 | 92,5 | 21 | 13 |
| JM (JGK) 240-14 | 92,5 | 21 | 14.7 |
| JM (JGK) 240-16 | 92,5 | 21 | 17 |
| JM (JGK) 240-20 | 94,5 | 21 | 21 |
| JM (JGK) 300-12 | 102 | 24 | 13 |
| JM (JGK) 300-16 | 102 | 24 | 17 |
| JM (JGK) 300-20 | 105 | 24 | 21 |
| JM (JGK) 400-16 | 114 | 27 | 17 |
| JM (JGK) 400-20 | 116 | 27 | 21 |
| JM (JGK) 500-16 | 127 | 30 | 17 |
| JM (JGK) 500-20 | 127 | 30 | 21 |
| JM (JGK) 630-16 | 140 | 35 | 17 |
| JM (JGK) 630-20 | 140 | 35 | 21 |
| JM (JGK) 630-22 | 140 | 35 | 23 |
| JM (JGK) 800-22 | 170 | 39 | 23 |
| JM (JGK) 1000-22 | 200 | 44 | 23 |
Technyske data
Materiaal: E-Cu
Oerflak behanneling: tin-plated
Produkteigenskip: It wurdt brûkt om it koperen dirigint ein te ferbinen.It hat in sichtfinster om de lokaasje fan de dirigint te kontrolearjen. En syn klokmûl is spesjaal ûntworpen om fleksibele diriginten te passen.Om't fyn strâne kabels in gruttere diameter hawwe as normale calbes.En se tend to splay út nei stripping, JGB lugs dy't trechter de stringen yn 'e lug en meitsje dirigint ynfoegje maklik.
| Model | L Ofmjittings (mm) d Φ | ||
| JM (JGK) 6-5 | 25 | 3.7 | 5.2 |
| JM (JGK) 6-6 | 25 | 3.7 | 6.5 |
| JM (JGK) 6-8 | 25 | 3.7 | 8.4 |
| JM (JGK) 10-6 | 26 | 4.5 | 6.5 |
| JM (JGK) 10-8 | 26 | 4.5 | 8.4 |
| JM (JGK) 10-10 | 28 | 4.5 | 10.3 |
| JM (JGK) 16-6 | 28.5 | 5.7 | 6.5 |
| JM (JGK) 16-8 | 30.5 | 5.7 | 8.4 |
| JM (JGK) 16-10 | 31 | 5.7 | 10.5 |
| JM (JGK) 25-6 | 33.5 | 7.2 | 6.5 |
| JM (JGK) 25-8 | 35 | 7.2 | 8.4 |
| JM (JGK) 25-10 | 35 | 7.2 | 10.5 |
| JM (JGK) 35-6 | 37,5 | 8.5 | 6.5 |
| JM (JGK) 35-8 | 38 | 8.5 | 8.5 |
| JM (JGK) 35-10 | 39 | 8.5 | 10.5 |
| JM (JGK) 35-12 | 39 | 8.5 | 13 |
| JM (JGK) 50-6 | 43,5 | 9.8 | 6.5 |
| JM (JGK) 50-8 | 45 | 9.8 | 8.5 |
| JM (JGK) 50-10 | 45 | 9.8 | 10.5 |
| JM (JGK) 50-12 | 45 | 9.8 | 13 |
| JM (JGK) 70-8 | 50 | 11.5 | 8.5 |
| JM (JGK) 70-10 | 51.5 | 11.5 | 10.5 |
| JM (JGK) 70-12 | 51.5 | 11.5 | 13 |
Technyske data
Materiaal: E-Cu;Al-99.6%
Oerflak behanneling: helder
Produkteigenskip: Troch it koppelingseffekt as aluminium yn kontakt komt mei koper, sil korrosje yn koarte tiid barre.Op it stuit is de bêste oplossing om aluminium-koper bimetaal-ferbiningen te brûken.In bimetaal lug moat brûkt wurde foar beëiniging.De friction welding is goed dien.En syn barrel capped is fol mei mienskiplike ferbining om oksidaasje te foarkommen.
| Model | L Ofmjittings (mm) | |||
| d | B | Φ | ||
| DTL 10-6 | 62 | 4.8 | 13.5 | 6.5 |
| DTL 16-8 | 70 | 5.8 | 16 | 8.5 |
| DTL 25-8 | 75 | 7.2 | 17.5 | 8.5 |
| DTL 35-10 | 85 | 8.5 | 20 | 10.5 |
| DTL 50-10 | 90 | 9.7 | 23 | 10.5 |
| DTL 70-12 | 102 | 11.5 | 26 | 12.5 |
| DTL 95-12 | 112 | 13.5 | 28 | 12.5 |
| Model | Ofmjittings (mm) | |||
| L | d | B | Φ | |
| DTL 120-14 | 120 | 15 | 31 | 14.5 |
| DTL 150-14 | 125 | 16.5 | 35 | 14.5 |
| DTL 185-16 | 133 | 18.5 | 37,5 | 17 |
| DTL 240-16 | 140 | 21 | 40 | 17 |
| DTL 300-18 | 160 | 23.5 | 44,5 | 18.5 |
| DTL 400-20 | 170 | 27 | 50 | 21 |
| DTL 500-20 | 225 | 29 | 60 | 21 |
Technyske data
Produkteigenskip: Troch it koppelingseffekt as aluminium yn kontakt komt mei koper, sil korrosje yn koarte tiid barre.Op it stuit is de bêste oplossing om aluminium-koper bi-metaal-ferbiningen te brûken.In bimetaal lug moat brûkt wurde foar beëiniging.De friction welding is goed dien.En syn barrel capped is fol mei mienskiplike ferbining om oksidaasje te foarkommen.De typetest folget IEC 61238-1.
| Model DTL-2-16-11 | P±0,3 D±0,5 d Ofmjittings(mm)0,3 W±0,5 S±0,3 ±0,3 L±3 L1± | ||||||
| Φ11 | Φ16 | Φ6 | 80 | 40 | Φ20 | 3 | |
| DTL-2-25-11 | Φ11 | Φ16 | Φ7 | 80 | 40 | Φ20 | 3 |
| DTL-2-35-11 | Φ11 | Φ16 | Φ8.5 | 80 | 40 | Φ20 | 3 |
| DTL-2-50-13 | Φ13 | Φ20 | Φ10 | 90 | 43 | Φ25 | 4.5 |
| DTL-2-70-13 | Φ13 | Φ20 | Φ11.5 | 90 | 43 | Φ25 | 4.5 |
| DTL-2-95-13 | Φ13 | Φ20 | Φ13.5 | 90 | 43 | Φ25 | 4.5 |
| DTL-2-120-13 | Φ13 | Φ25 | Φ15 | 115 | 59 | Φ30 | 5.5 |
| DTL-2-150-13 | Φ13 | Φ25 | Φ16,5 | 115 | 59 | Φ30 | 5.5 |
| Model DTL-2-185-13 | P±0,3 D±0,5 d Ofmjittings(mm)0,3 W±0,5 S±0,3 ±0,3 L±3 L1± | ||||||
| Φ13 | Φ32 | Φ18,5 | 122 | 60 | Φ30 | 6 | |
| DTL-2-240-13 | Φ13 | Φ32 | Φ21 | 122 | 60 | Φ35 | 6 |
| DTL-2-300-13 | Φ13 | Φ34 | Φ23,5 | 128 | 65 | Φ35 | 6 |
| DTL-2-400-17 | Φ17 | Φ40 | Φ26 | 160 | 90 | Φ36 | 6 |
| DTL-2-500-17 | Φ17 | Φ40 | Φ30 | 160 | 95 | Φ36 | 6 |
| DTL-2-630-17 | Φ17 | Φ47 | Φ33.5 | 205 | 95 | Φ60 | 10 |
| DTL-2-800 | Φ17 | Φ60 | Φ38,5 | 240 | 110 | Φ80 | 10 |
| DTL-2-1000 | Φ17 | Φ60 | Φ43,5 | 240 | 110 | Φ80 | 10 |
Technyske data
Materiaal: E-Cu
Oerflak behanneling: tin-plated
Produkteigenskip: It wurdt brûkt om koperen dirigint te ferbinen.
| Model GTY-1-1.5 | LAfmjittings (mm) d | |
| 20 | 1.9 | |
| GTY-1-2.5 | 20 | 2.8 |
| GTY-1-4 | 20 | 3.2 |
| GTY-1-6 | 25 | 3.7 |
| GTY-1-10 | 30 | 4.5 |
| GTY-1-16 | 35 | 5.7 |
| GTY-1-25 | 40 | 7.2 |
| GTY-1-35 | 45 | 8.5 |
| GTY-1-50 | 50 | 9.8 |
| GTY-1-70 | 55 | 11.5 |
| GTY-1-95 | 60 | 13.7 |
| Model GTY-1-120 | LAfmjittings (mm) d | |
| 65 | 15 | |
| GTY-1-150 | 70 | 16.7 |
| GTY-1-185 | 75 | 19.2 |
| GTY-1-240 | 80 | 21 |
| GTY-1-300 | 85 | 24 |
| GTY-1-400 | 90 | 27 |
| GTY-1-500 | 100 | 30 |
| GTY-1-630 | 110 | 35 |
| GTY-1-800 | 150 | 39 |
| GTY-1-1000 | 170 | 44 |
Technyske data
Materiaal: E-Cu;Al-99.6%
Oerflak behanneling: helder
Produkteigenskip: Troch it koppelingseffekt as Aluminium yn kontakt komt mei Koper, sil korrosje yn koarte tiid barre.Op it stuit is de bêste oplossing om aluminium-koper bimetaal-ferbiningen te brûken.In bimetaal keppeling moat brûkt wurde foar joint.
De friction welding is goed dien.En syn aluminium barrel capped is fol mei mienskiplike ferbining om oksidaasje te foarkommen.
| Model GTL-AL25/CU16 | L Ofmjittings (mm) d d1 | ||
| 70 | 6.8 | 5.5 | |
| GTL-AL35/CU16 | 76 | 8 | 5.5 |
| GTL-AL35/CU25 | 82 | 8 | 7 |
| GTL-AL50/CU25 | 85 | 9.8 | 7 |
| GTL-AL50/CU35 | 90 | 9.8 | 8.2 |
| GTL-AL70/CU35 | 95 | 11.2 | 8.2 |
| GTL-AL70/CU50 | 100 | 11.2 | 10 |
| GTL-AL95/CU50 | 105 | 13.2 | 10 |
| GTL-AL95/CU70 | 110 | 13.2 | 11.5 |
| GTL-AL120/CU70 | 116 | 14.7 | 11.5 |
| Model GTL-AL120/CU95 | L Ofmjittings (mm) d1d | ||
| 118 | 14.7 | 13.5 | |
| GTL-AL150/CU95 | 120 | 16.3 | 13.5 |
| GTL-AL150/CU120 | 122 | 16.3 | 15.5 |
| GTL-AL185/CU120 | 128 | 18.3 | 15.5 |
| GTL-AL185/CU150 | 130 | 18.3 | 17 |
| GTL-AL240/CU150 | 132 | 21 | 17 |
| GTL-AL240/CU185 | 135 | 21 | 19 |
| G TL-AL240/CU240 | 140 | 21 | 21.5 |
| GTL-AL300/CU240 | 145 | 23.3 | 21.5 |
| GTL-AL300/CU300 | 150 | 23.3 | 21.5 |
